FS Series

Feature
  • Modular tooling: Free arrangement of different tool spindles ID tool holders and OD Turning tool holders according to tooling requirements of the parts to be produced.
  • With separate back tool post and cross traveling of back spindle, exactly simultaneous machining at main spindle side (S1) and back spindle side(S2) can be achieved without need to wait with each other reducing cycle time much.
  • With Y-axis for back tool post ㆍ4 live tools(T31~734) and 4 fixed tools(T35~T38) ㆍBack cross tool spindle (as the picture shown below ) ) :Available for back ㆍ cross drilling > tapping or milling depending upon cutting tool in use ,Total 2 back
  • cross tool spindles can be mounted with one tool position between. ㆍBack look spindle: Available for back milling-off-center drilling tapping, etc. ㆍ Cartridge type tool spindle design for T31 ~T34 , available for interchange with other different tool spindle or adaptor for fixed tool more choices for tooling layout design.
  • Cartridge type tool spindle design for cross tool T11, T13 Available for interchange with other different tool spindles, convenient for optimum tooling layout design according to the parts to be produced
  • Direct motor-drive rotary guide bushing available for high-speed and accurate machining ㆍMax speed 12,000 min * Max machining length: 210 mm Geometry accuracy dimension accuracy and surface roughness are much improved, with less noise even at high speed.
  • Guide bushing type or guide bushing- less type is selectable according to length of the parts to be produced Guide bushing-less type does not require ground bar stocks, suitable for cold drawn bar machining also reducing the remaining bar length.
  • Additional face deep hole drilling post is attached beside the back spindle. Max, drilling depth can be up to 100 mm.
  • Single-face or double-face drill collet holder can be mounted at 9 22- bore 5-position fixed tool post available for face or both face /back.
  • Direct C-axis indexing: When spindle indexing is done from spindle indexing rotating slate , it stops at indexed position directly without need to return to reference point reducing spindle indexing time.
  • High rigid machine bed Machine bed design was supported by FEM(Finite element method) analysis to produce high-rigidity machine assuring high-speed, high - accuracy machining.
  • Thread whirling head: Mountable at T11 for processing bone screws or long threads.
  • Work catcher: Conveying the work discharged from back spindle through the chute to work conveyor ,then work container ID working

    •   Model FS-206 FS-207

    No. of tool positions

    		 28 31

    Max. No. of mountable tools

    		 39 35

    OD tool (T04 - T08,T21 -T23)

    		 8 8
    Face fixed ID tool (T15 - T19) 5 4

    Face deep-hole drilling tool (T91 - T92)

    		 2 2

    Back fixed ID tool (T35 - T38, T45 - T29)

    		 4（OPT.： 9） 4（OPT.： 8）

    Left cross live tool (T01 - T03)

    		 3 3

    Right cross live tool (T11 &T13)

    		 2 3（B-axis）

    Face live tool (T11&T13)

    		 0（OPT.： 4） 3（B-axis）

    Back live tool (T31- T34, T11&T13)

    		 4（OPT.： 8） 4 + 3（B-axis）

    cnc 走心式巨型車床尺寸圖

    cnc 走心式巨型車床-刀具系統
    Back
    Send inquiry